Small knowledge in the operation of textile sludge dryer

In textile printing and dyeing industry, textile sludge dryer is widely used. A qualified dryer requires not only professional production and manufacturing technology, but also the user's maintenance according to the regulations, so as to better develop the performance of the equipment. Therefore, in order to reduce the failure rate and maintain the normal operation of the equipment, it is necessary to know some knowledge about the operation of the dryer.

The main part of textile sludge dryer is mainly composed of base, tugboat, transmission device, feeding and discharging system, main machine and other components. The drying machine is a three nested concentric cylinder. The wet sludge is broken up after entering the cylinder. With the rotation of the cylinder, it rises and falls repeatedly under the action of the plate. After contacting with the hot air, it carries out heat and mass transfer, and then gradually dries the moisture in the sludge to achieve the purpose of deep dehydration.

During the normal operation of the equipment, it is necessary to measure the temperature of the cylinder to prevent the phenomenon of too high or too low temperature. Due to the limited thermal bearing capacity of the straight section of the equipment, the working temperature of the cylinder can not be increased indefinitely. If the temperature exceeds the specified range, the cylinder may be deformed. If the temperature is too low to reach the reasonable drying temperature, it will affect the drying effect. Therefore, in the process of equipment operation, temperature control is very important.

The knowledge about the textile sludge dryer is introduced here, which will be taken into consideration by the technical personnel in the design to ensure that the design of the equipment is more reasonable and convenient to use.