After the installation of silicon sludge drying machine, it still needs several days of running in period

Many users do not know that it will take a period of running in period (2 or 3 days) after the silica sludge drying machine is installed to start normal operation. The advantages of this are: 1. During the running in period, the operators can familiarize themselves with the correct operation methods, which can not only develop the performance of the equipment, improve the productivity, but also extend the service life of the equipment. 2. Ensure the normal operation of the equipment after the formal production, and to a large extent reduce the probability of equipment failure. So how to do it? Please look down.

1. Routine inspection is indispensable

Check whether the sealing parts are in good condition, whether the sealing parts are in good condition, whether they can be lubricated before the sealing device is in place, etc. In particular, the easy to wear parts inspection and bearing lubrication work, need to be checked often, not only after the installation of the inspection once completed.

2. Operator training

Before the start of running in period, the silicon sludge drying machine manufacturers will strictly train the operators on the relevant solutions of the equipment, such as equipment structure, operation method, performance parameters, daily maintenance, etc., and the operators are required to be familiar with the instructions of the drying machine and work on the basis of these operation knowledge, which is helpful for the correct operation of the equipment, And give full play to the real performance of the equipment, speed up the drying efficiency.

3. Regular maintenance

After the running in period, the equipment needs to be maintained regularly, such as keeping the equipment clean, checking the looseness of various parts, etc. good maintenance can greatly reduce the failure rate of the equipment. In addition, we should pay attention to some abnormal conditions during the operation of the equipment. If the abnormal noise and abnormal temperature occur in the normal operation of the equipment, we should contact the manufacturer in time for the problems that cannot be solved by ourselves due to the immediate shutdown and inspection.