What are the installation measures of printing and dyeing sludge drying equipment?

If the multiple-loop printing and dyeing sludge drying equipment wants to run stably at high speed, it is necessary to lay a good foundation in the equipment installation and commissioning stage. Technical personnel should strictly abide by the installation and construction process, and should not be careless, otherwise it will not only affect the construction progress, but also bring inconvenience to the normal operation and management of the equipment. As a professional manufacturer of high humidity and high viscosity printing and dyeing sludge drying equipment, ZJN environmental protection equipment not only has many years of project installation and debugging experience, but also has a professional installation team. So in the printing and dyeing sludge drying equipment installation process what measures? Let's have a look.

1. Inspection before installation

Before installation, all parts, standard parts and spare parts of the equipment shall be checked and counted according to the equipment list provided by the manufacturer to ensure that the quantity and quality are correct, and there is no problem of missing or missing or damaged accessories. In addition, for the printing and dyeing sludge drying host size, specifications should be checked to see whether it meets the requirements of the design drawings.

2. Cleaning and pre installation

Before installation, the outer packaging and protective layer of all parts of the equipment should be cleaned up. The key parts of the equipment can be pre tested and pre assembled, which can avoid rework during the installation process and ensure the installation progress and quality. In addition, the installation personnel in the formal installation, should be in accordance with the installation procedures, the quality of installation to comply with the relevant technical specifications.

3. Ensure smooth installation of equipment

In order to ensure the stable operation of printing and dyeing sludge drying equipment, it is necessary to ensure the stability of the equipment during installation. First of all, the layout of the base plate should be reasonable to prevent uneven force and empty angle shaking. Secondly, professional instruments should be used for leveling during installation to ensure that the cylinder falls down smoothly when lifting. If the cylinder is heavy, it can also be lifted in sections. In order to ensure that there is no hidden danger, it is necessary to formulate specific methods and the necessary auxiliary support frame, tools and other measures.

4. Commissioning after installation

After the installation of the printing and dyeing sludge dryer, it is necessary to carry out the commissioning. The empty load test can be carried out first, and then the loaded test machine can be carried out after there are no problems. The commissioning should be carried out according to the operation instructions. If there is any abnormality, the machine should be shut down for inspection.

Many kinds of printing and dyeing sludge drying equipment produced by ZJN environmental protection equipment can meet the needs of drying operation of large and medium-sized textile printing and dyeing enterprises. It has the advantages of large output, low energy consumption and small floor space. If you want to know more about it, you can contact our customer service.